Carpenter's Star Christmas Quilt Part 1

If there's one thing I've learned from my overdue blogging, it's that I forget the details from my crafts and recipes.  Trying to avoid that, I'm going to start detailing some of the exciting specifics as I begin piecing together my newest quilt!  It's a gorgeous carpenter's star I first saw on this quilt on Pinterest.  I figured out my own pattern from that (sadly, the link only showed the final quilting- not the pattern), and I made a quilt for my mother-in-law last Christmas.  A couple more baby quilts later, I wanted to revive the carpenter's star pattern for a red and white Christmas quilt for my family.  I am well aware that it is still summer, but I like having plenty of time to poke around and work on a quilt.  I made the one for my mother-in-law in a breakneck 6 weeks last winter and I have no need to repeat that frenzy.

So, those details I mentioned:

Pattern:

Fabric (for twin size quilt)

[Note: will result in plenty of extra fabric (~1/3 yard per color), which I count as a good thing for inevitable bad cuts, poor calculation (cough cough), stains, loved ones running off with bits of fabric, or other quilting- or life-related issues.)

• 4 yards white fabric
• 4 yards red fabric
• 1/2 yard binding fabric
• 4 1/2 yards backing fabric
• Twin quilt batting- high loft
• Red thread
• White thread

For the quilt top, I ended up getting 4 different patterns of red fabric (1 yard each), 3 patterns of white fabric (1 yard each), and 1 pattern with holly leaves- a mix of red, white, and green, as an accent stand in for some white parts of the star (1 yard).  I got a different red for the binding, and am using one of my red quilt top patterns for the backing (so for that pattern, I got 5 1/2 yards of fabric total).  With a 20% off coupon, the supplies all cost ~$80 I think.

Squares and Half-Square Triangles (HSTs)

• For each color, cut 12 squares and 24 HSTs
• Squares measure 5 1/2" square
• HSTs cut from 5 7/8" squares; end triangle measurement is 5 7/8 x 5 7/8 x 8 1/4; HSTs sewn together will measure 5 1/2" square, the same as your regular squares

I definitely needed to capture these measurements because I did NOT remember my sizes from the last star quilt.  I tried looking up some handy dandy charts online, and unfortunately the one I followed was off, perhaps because I wasn't cutting my HSTs the same way they were.  There are a lot of great tricks to save you time, but they require you to have multiple triangle pairs of the same two fabrics, which is not the case in my quilt.  What I did was cut each larger square, and cut it in half to get 2 triangles.  That likely threw off my end measurements to be bigger than the blossom heart quilts table.  Live and learn, right?  I had a lot of excess fabric so I cut new squares (now 5 1/2" square) to match my larger assembled HST squares.

After hours of cutting and laying out the pieces in the pattern, here's where I wound up:

As you can see, my designated spot in the living room was too small, so I had to lay out portions on the couch.  That's ok.  :)  You can see the few spots where I swapped out an all-white portion for the holly pattern.  I originally had the holly scattered throughout the white parts and it was too distracting, so I consolidated into designated groups and was much happier.

I currently have 4 or 5 rows sewn together, so I'm about 1/4 of the way through the quilt top rows.  Onward and upward!

Christopher and the Purple Crayon

My son recently celebrated his 5th birthday, and one of his gifts was the classic book, Harold and the Purple Crayon.  It left quite the impression on my little artist, and he wanted to make his own version of the book.  Here are pics of his book, with some notes to explain it along the way.  Enjoy.

While Harold starts with the moon, Christopher chose the sun.  Maybe it's because he's golden.

Apple trees

Sailboat

Picnic lunch

The hungry moose and porcupine get to eat the lunch leftovers.

Hot air balloon

Hot air balloon lands on the grass at Christopher's house.

Broken Herringbone Quilt: Work in Progress Part 5 (Final Part!)

For the FINAL installment in my Broken Herringbone Quilt series, we pick up where we left off in Part 4, and move on with the actual quilting and binding for this amazing quilt.

First, lay the quilt top on the batting.  Leave a good size excess past the quilt top in each direction (in this case, 2-3").  Trim excess past that.

Trimmed to make it manageable to work with but still leave extra.  As I quilt from the center outward, the quilt top will expand a bit so I need to know I'll have batting to quilt onto by the time I reach the edges.

Flip the quilt top and batting over and lay down the backing fabric.  For this quilt I just wanted a crisp white back.  I had to cut two pieces of fabric and sew them together to get the right length/width for my lap quilt.  The yardage just wasn't wide enough on its own straight from the bolt, and this is pretty common.
Fold the fabric in half over itself and spray the batting with spray adhesive. Carefully lay the backing fabric onto the sprayed portion of the batting, and repeat for the other side.  Flip the quilt over gently and spray the quilt top into place as well.

I didn't use adhesive on my first quilt and I can say it did make a difference while it retained its stick.  I took weeks to quilt this bad boy, though, so by the end the adhesive had worn off.  Maybe it's because I used this tacky spray instead of one specifically made for quilting.

Sprayed and smoothed out.  Now we pin!

It helps a lot to use these curved safety pins that reach down into the layers and then come back up so smoothly, rather than a straight safety pin.

I pinned in most of my herringbone rectangles, but I ran out of safety pins.  This proved troublesome later so I recommend you invest in a mountain of safety pins so you can pin each square/rectangle in your pattern.  You don't want things stretching out of place as you quilt.

Make sure your pins go all the way through the layers, too!  I'd periodically flip the quilt to make sure I saw them peeking through the backing fabric.

And now the quilting can commence!  I was delighted to realize I did in fact have a quilting foot that came with my sewing machine.  Especially with this pattern, the quilting foot was a LIFESAVER.  You can go in any direction without having to constantly stop, move the back button, restart, etc.

Laying out the quilt and starting in the middle of the quilt.  All the tutorials I read stressed how important that is.  So starting in the middle, I began tracing the white lines in my herringbone pattern.  I want that blank white back of the quilt to show the herringbone pattern clearly!

I've also learned to roll the excess quilt that I've already sewn or haven't yet sewn into this neat bundle under the sewing machine.  Just keep rolling/unrolling as you work and it makes that volume of fabric more manageable.

A little sneak peak of how tracing the herringbone pattern on the quilt top translates on the back of the quilt.

Quilting done!  Ermahgerd!  Time to trim the leftover batting, which you can see was pretty much what I started with.  Hmm.  Not sure if the stretching that takes place while quilting is as dramatic as I thought it was, but oh well.  Not a bother at all. :)

This point is so deceptive.  It's super exciting because it's SO CLOSE to done, but binding is no small feat.  Sigh.  Onward march.

I'm binding the fabric in navy blue, and I've already cut 5 strips that are 3" wide, and as long as the width of my lap quilt (WOF).  I need to attach the pieces end-to-end perpendicularly.  So step one is to attach the ends at an angle like this and pin in place.

Then draw a straight line across the diagonal where they meet.  Stitch in navy thread to be all coordinating and feel overly proud of yourself.

Cut off the part past your seam, leaving about 1/4" past the seam.

When you unfold, the strips are now attached at a diagonal.  My strips never lined up perfectly but I guess it's no big deal as you walk through the folds and everything that takes place with binding.

Once the strips are all sewn together, it's time to fold them in half (definitely iron so the fold stays put) and pin them in place along the edge of the quilt, raw edge lining up with the raw edge of the quilt.  You'll have a lot of excess binding at the beginning and end.

Just kind of pin that excess out of the way.  You'll need to carefully sew the beginning and end to each other when you finish up.  I have no hope of explaining that process well myself, so I'll just direct you to the tutorial I used here.

Once that's done you sew along the edges (1/4" seam allowance), and fold the fabric over to the back.  Hand stitch in place.

AND THEN YOU'RE DONE!  Eeeee!  Look at that herringbone design all over the back.  Ahhh.

Close up!

The quilt is done!  Time dance around the kitchen like a crazy person.  Post to FB about 2 seconds later.

I seriously love this quilt so much.  It looks beautiful and colorful and I love the patterns.  It's a great size for my 4-year-old son to snuggle up with, or even little me for that matter.  For my tall husband it just covers his lap when he's lounging on the couch and that's fine.  Big pat on my back for this one, and a mental note to enter it in the fair next summer. ;)

Ornament Wreath

 

I have been wanting an ornament wreath for years now.  Each fall/winter I see Pinterest blow up with these awesome looking wreaths, but I can never find inexpensive shatterproof ornaments to do it myself.  I'm also not ok with shelling out $100 for one of these store bought guys.  This year, I finally found it- $5 for a set of 12 shatterproof ornaments at Bed Bath & Beyond.  Yes!!!  And of course once I clued in to the term "shatterproof" I saw tons of listings on Amazon to get anywhere from 60 to 100+ of these bad boys.  Anyway, now that I'm in the know, I'm happy to share my great wreath with you.

Supplies

• 4-6 dozen shatterproof ornaments
• 2-3 dozen mini ornaments
• Foam wreath form
• Hot glue gun and glue
• Knife

Directions

1. Cut hole in wreath form large enough to fit the top of your large shatterproof ornament into (the part you normally put the hook in).  Put a dab of hot glue in the hole, and set the top of the ornament into the hole.  Hold a minute to set.  Repeat times a gajillion until the wreath form is evenly covered in larger ornaments.
2. Hot glue a circle around the top of a mini ornament and glue into gaps between the large ornaments.  Repeat times a gajillion until gaps are well filled in.
3. Hang!  Bow optional. :)

This really isn't a complex project.  The key is to varying the placement of your ornaments so they have a pretty organic flow and don't look like perfectly lined up rows of ornaments.  You want them to look random and bubbly, and you use those small ornaments to fill in the spaces so you don't see your wreath form underneath.  That's it!

First layer down.  Looking good!  The base is well covered, I alternated red and silver, shiny and matte, and the inner part of the wreath out to the edge.

Now we've got the mini ornaments layered on to fill in those gaps.  I even pulled out and rearranged and added more of the larger ornaments as I went.

Mini Ornament Christmas Tree

 

This is such a super cute, easy project you can do in less than 30 minutes.  A friend and I each made these at our recent Christmas crafting Pinterest party, and I love the end result.  This is a great decoration for the holidays, and I think it would even be a special gift.  Lots of wow for the beginning crafter.  :)

Supplies

• 2-3 dozen mini ornaments
• Picture frame or other solid surface
• Hot glue gun and glue
• Optional: Star ornament for the top of the tree, cut branch or twig for your tree stump, scrapbook paper presents under the tree, paint words onto the glass, draw on the glass with sharpie, etc.

Directions

1. Remove the toppers from all of your mini ornaments.  Lay out ornaments in your pattern, arranging colors, matte vs shiny, etc. to get nice variation in your tree design.
2. Hot glue the top of each ornament and glue onto the glass of your picture frame.  Hold in place a couple seconds until it sets.  Repeat until all ornaments are glued in place.

THAT'S IT!  Seriously, it can't get much easier than that!  Yes your ornaments will roll around a bit as you get things in place, and yes you may get some off-centered situations going, but it's all ok.  This craft is all about simplicity and not over complicating things.  Love it and display with pride!

Fab!

Decorate a Pillowcase with Stamps and Paint

 

I was in Michael's a while back and saw these great key stamps, and I somehow got it stuck in my head that I'd love a pillow covered in a pattern with those stamps, and maybe some C monograms.  And a bird cage, because why not?  I didn't know how I'd make it work, but that idea percolated in the back of my head and with time, I got to this point!  Turns out you can paint designs on fabric and they'll actually set and turn out really well.  Who knew?!  So let me walk you through how I got this lovely pillow. :)

Supplies

• 1/2 yard fabric (or more, depending on the size of the pillow you'll be covering).  Pro tip: check out the remnants bin at the fabric store.  I scored this super soft fabric for a fraction of the cost.
• Craft paint
• Rubber stamps
• Paint brushes
• 3/4" wide Bias tape- enough to trim all around your pillow (for this one it was ~48")
• Cording- same length as your bias tape
• Coordinating thread and sewing notions

Directions

1. Pre-wash and iron fabric.  Lay out fabric on a covered work surface.  When you stamp and paint, it may bleed through the fabric.
2. Dip rubber stamp in paint and stamp a couple times on a paper towel or rag to remove excess ink.  Stamp smoothly and evenly on pillowcase fabric, then lift gently.  Repeat.  I recommend you do a few stamps before dipping back in the paint, so you get variation in the stamped images.  With very bold graphic stamps, though, I think a pattern with saturated images could be really great, so just let your eye determine how much or little paint to stamp with.  I also alternated between dipping my stamp in the paint and using a paint brush to brush paint onto the stamp.  Don't ask me why- it just felt right. :)
3. Use paint brushes to add accents such as my large bird cage, text, lines, dots, etc.  Let me be very clear that I am not an artist by any stretch, but that bird cage came out pretty decently, didn't it?  I always recommend googling some pictures or other artwork to use as a guide if you're feeling wary of this step, and know you're always your own worst critic.  The end result is going to be pretty great overall so don't sweat this part!
4. Cover at least half of the pillowcase fabric with your stamp and painted pattern.  If you want the whole pillow case covered (for front and back), go for it!  Let paint dry completely.
5. Lay out bias tape.  If you want to make your own like I did, I recommend this great tutorial on cutting it, sewing it, and even making piping.  I also like this blog post for attaching your pieces together.
6. Place cording in the center of your bias tape, fold over bias tape, and sew the cording in place.  This makes great piping for your pillow!  Credit to crazy little projects for their piping tutorial. :)
7. Cut fabric to size of your pillow form.  Lay one side of the pillow right side up and pin your piping along the edges (the piping will lay on the fabric, not extending past it).  Pin and sew the piping edge to edge to the pillowcase fabric.
8. Lay the other half of your fabric right side down, pin in place, and sew along 3 of the 4 sides.
9. Turn pillowcase right side out and poke out corners fully.  Insert pillow form and hand sew the final edge together.  Admire!

Getting started!  Fabric laid out on magazines, paint and stamps ready to go.  Never mind the spots on the fabric- they're still a little damp from ironing.

Stamped, painted, and waiting to dry.  So awesome!

I opted to try making my own bias tape.  It was surprisingly not so bad!  I used this great you tube tutorial to watch how it's done.  I don't know why but this British girl in her kitchen makes me happy.

Basically you just fold one corner of your fabric up to the other, making a triangle, and you cut a nice strip along the fold.  If you need additional length, you measure out and cut another strip parallel to the first.  Then connect.  Easy peasy!

Why didn't I nab a picture when I sewed the cording inside the bias tape?  Ah well.  Here we have the assembled piping pinned in place- loose edge lined up with the loose edge of my pillowcase fabric.  Note this is the "good" side of my fabric, just left plain for the back of the pillowcase.

Piping sewn in place, I then lay my decorated half of the fabric right side down on top.  Pin, then sew 3 of the 4 sides.

All sewn up.  Time to turn inside out, stuff in my pillow form, and sew it up!

Complete!  Ahhh, so satisfying. :)